SATO CX208/212 Guía de usuario descargar pdf (Pagina 19)

Special Notes 1. UPC and EAN bar codes are not affected by the different types of

narrow to wide ratios. Instead, the <ESC>D command adds

descender bars to these codes where needed to meet UPC

specifications. The <ESC>BD command puts decender bars and

human readable text below the symbol.

2. The Code 128, UCC 128, MSI, and Code 93 bar codes are not

affected by the narrow to wide ratios.

3. The Codabar and Code 39 bar codes are affected by the

Character Pitch command. This command must be placed before

the Bar Code command.

4. Because of their unique characteristics, two-dimensional symbols

are covered separately.

5. For UCC128, the FNC1 code is automatically inserted and the

Mod 10 and Mod 103 check digits are automatically calculated.

6. For the MSI bar code, the check digit is not automatically

calculated.

7. To select UPC-A, 11 digits of data is sent. The printer adds a “0”

and automatically generates the check digit. If 12 digits of data are

sent, the printer asumes an EAN-13 symbol and automatically

generates the check digit. The last digit of the bar code data is a

modulo 10 check digit. If 13 digits of data are sent to the printer,

the check digit is not created and must be supplied by the

programmer. It must be the last character of the 13 digit string.

Page15PN9001092Rev.BSATOCX208/212Printers

CX208/212 Programming Guide

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 103 104

Sin comentarios

SATO CX208/212 Guía de usuario Pagina 19