SATO GL 4xxe Series Guía de instalación descargar pdf (Pagina 7)

Removing the Print Head

1. Release the print head

assembly by turning the head

lock latch counterclockwise.

2. Press the spring-loaded tab

as indicated here, to release

the print head.

3. Disconnect the data and

power cables from the print

head.

4. Set the print head aside for

now.

Note:

ESD (electrostatic discharge)

protection is recommended for this

step. Anti-static lint-free gloves

should be worn at all times when

you are handling print heads.

Figure 2a.

Turning the head lock latch

Figure 2b.

Print head removed

1 2 3 4 5 6 7 8 9 10 11

Sin comentarios

SATO GL 4xxe Series Guía de instalación Pagina 7